Polymarine Glue
For PVC Inflatable Boats/Ribs
Type: 3026 PVC Glue
PVC Glue Manual
Repairing & Bonding PVC Tubes
Self-Adhesive Patches, D-Rings
& Rubber Accessories
SIDE 2
Not sure if your inner tubes
also called "tubes") are made of PVC or Hypalon
?
If you are going to repair or bond tubes,
you need to know what the sponsons of your inflatable
boat are made of. It is very important
to use glue that is suitable for either PVC
or Hypalon.
You can find information online about
how to determine what material your
boat is made of:
Side 3
PVC Adhesives
3026 PVC Glue, Two-Part, 250ml Can.
A PVC adhesive for inflatable boats.
NOTE: For complete adhesion, a 2903-
solvent must be used before applying the adhesive.
Solvent-based polyurethane adhesive
provides excellent adhesion to both
plasticized and non-plasticized
PVC. Combined with
Hardener 3695, it bonds a wide range of surfaces, including PVC, nylon,
polyurethane, and foam.
Use for repairs to all PVC boats,
including "Dynalon" and "Strongon"
fabrics from Zodiac/Bombard and "Hypertex" from
Narwhal/Valiant. Easy to mix and
comes in two parts with exactly the right amount of hardener.
Can be used as a single-part adhesive
for quick, temporary repairs. Easy to apply
with a stiff, shortened brush.
Bands in 10-15 minutes,
fully cured after 48 hours.
Shelf life
– see date on unopened can. Once mixed,
it remains usable for 3-4 hours. When applying two coats,
1 liter is sufficient for 1 m².
Primer-solvent 2903 should be applied before
gluing as a primer for
maximum adhesion. Used by
liferaft maintenance departments and major
manufacturers.
Brand: Polymarine
Type: 3026 PVC adhesive
For PVC inflatable boats/Ribs
